Rockford Fosgate Punch 250.2 2-Kanal Kult Amp. Made in USA
Im Lieferumfang enthalten sind:
Der Amp kommt in original Verpackung inkl. Anleitung.
Der Amp befindet sich in einen guten Zustand.
Auslaufmodell
250.2 SPECIFICATIONs
Dynamic Power Rating (IHF-202 Standard) - Measured at 14.4V
Per channel into a 4 Ohm load 180 Watts
Per channel into a 2 Ohm load 310 Watts
Bridged into a 4 Ohm load 620 Watts
Continuous Power Rating (Competition Standard) - Measured at 13.8 Battery Volts
RMS continuous power per channel,
both channels driven into a 4 Ohm load from 20 to 20,000Hz with less than 0.05% THD (Total Harmonic Distortion) 125 Watts
RMS continuous power per channel, both channels driven into a 2 Ohm load from 20-20,000Hz, with less than 0.10% THD 225 Watts
RMS continuous power mono, into 4 Ohm load from 20-20,000Hz, with less than 0.1% THD 450 Watts
Common Mode Rejection Ratio (CMRR): Typically 40dB
Signal-to-Noise Ratio: >100dB (A-weighted)
Frequency Response: 20Hz-20,000Hz ‡0.5dB
Bandwidth: 10Hz-250kHz‡3dB
Damping Factor @ 452 (at output connector): >200
Slew Rate: 50V us
IM Distortion (IHF): <0.05%
Input Impedance: 20k Ohms
Input Sensitivity: Variable from 300mV to 5V Preset at the factory for 500mV
B+ Fuse Size: (External to amplifier) 60 Amp or two 30 Amp
Fuse Type: AGU / Maxi Fuse
Crossover Alignment: 12dB or 24dB/octave Butterworth
Factory Crossover Frequency: 80Hz (0.047 uf)
Factory Default Crossover Setting: Full Range
Dimensions: (including end caps) 9-5/8"W × 14-9/32"L x 2-5/8"H (24.4cm) × (36.27cm) x (6.6cm)
Angaben zur Produktsicherheit
Herstellerinformationen:
Rockford Fosgate Headquarters
600 South Rockford Drive
Arizona 85288, Vereinigte Staaten, Tempe
https://rockfordfosgate.com/contact-us/
verantwortliche Person:
MD-Sound GmbH + Co. KG
Im Wiesgarten 5
Bayern
Karsbach, Deutschland, 97783
info@md-sound.de